 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Microprocessor Supervisory Circuit in 4-Lead SC70 ADM6384 FEATURES Precision power supply monitoring 31 reset threshold options 1.58 V to 5.0 V Four reset timeouts 1 ms, 20 ms, 140 ms, 1120 ms Manual reset input Reset output stage Push-pull active-low Guaranteed reset output valid to VCC = 1 V Power supply glitch immunity Specified over -40C to +125C temperature range 4-lead SC70 package FUNCTIONAL BLOCK DIAGRAMS ADM6384 VCC VREF RESET GENERATOR RESET MR DEBOUNCE GND 05305-001 Figure 1. VCC VCC APPLICATIONS Microprocessor systems Computers Controllers Intelligent instruments Portable equipment ADM6384 MR RESET 100k 05305-002 P RESET GND GND Figure 2. GENERAL DESCRIPTION The ADM6384 is a supervisory circuit that monitors power supply voltage levels in microprocessor-based systems. A power-on reset signal is generated when the supply voltage rises to a preset threshold level. The debounced manual reset input of the ADM6384 can be used to initiate a reset by means of an external push-button or logic signal. The part is available in a choice of 31 reset threshold options, from 1.58 V to 5.0 V. The minimum reset timeout periods are 1 ms, 20 ms, 140 ms, and 1120 ms. The ADM6384 is available in a 4-lead SC70 package and typically consumes only 7 A, making it suitable for use in low power, portable applications. Rev. 0 Information furnished by Analog Devices is believed to be accurate and reliable. However, no responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other rights of third parties that may result from its use. Specifications subject to change without notice. No license is granted by implication or otherwise under any patent or patent rights of Analog Devices. Trademarks and registered trademarks are the property of their respective owners. One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A. Tel: 781.329.4700 www.analog.com Fax: 781.461.3113 (c) 2005 Analog Devices, Inc. All rights reserved. ADM6384 TABLE OF CONTENTS Specifications..................................................................................... 3 Absolute Maximum Ratings............................................................ 5 ESD Caution.................................................................................. 5 Pin Configuration and Function Descriptions............................. 6 Typical Performance Characteristics ............................................. 7 Circuit Description........................................................................... 9 Reset Output ................................................................................. 9 Manual Reset Input .......................................................................9 Application Information................................................................ 10 Negative-Going VCC Transients ................................................ 10 Ensuring Reset Valid to VCC = 0 V ........................................... 10 Outline Dimensions ....................................................................... 11 Ordering Guide .......................................................................... 11 REVISION HISTORY 7/05--Revision 0: Initial Version Rev. 0 | Page 2 of 12 ADM6384 SPECIFICATIONS VCC = full operating range; TA = -40C to +125C, unless otherwise noted. Table 1. Parameter SUPPLY VCC Operating Voltage Range Supply Current Min 1 7 6 4 3 4.88 4.78 4.68 4.58 4.51 4.39 4.27 4.19 4.1 4.0 3.9 3.8 3.71 3.61 3.51 3.41 3.32 3.22 3.12 3.00 2.93 2.85 2.73 2.63 2.56 2.44 2.34 2.26 2.13 1.62 1.54 5.00 4.90 4.80 4.70 4.63 4.5 4.38 4.30 4.2 4.1 4.0 3.9 3.8 3.7 3.6 3.5 3.4 3.3 3.2 3.08 3.0 2.93 2.8 2.70 2.63 2.5 2.4 2.31 2.19 1.67 1.58 60 35 2 x VTH 1 20 140 1120 2 40 280 2240 Typ Max 5.5 13 11 7 6 5.12 5.02 4.92 4.82 4.74 4.61 4.48 4.41 4.31 4.2 4.1 4.0 3.9 3.79 3.69 3.59 3.49 3.38 3.28 3.15 3.08 3.00 2.87 2.77 2.69 2.56 2.46 2.37 2.24 1.71 1.61 Unit V A A A A V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V V ppm/C s mV ms ms ms ms Test Conditions/Comments VCC = 5.5 V, no load VCC = 3.6 V, no load VCC = 2.5 V, no load 1 VCC = 1.8 V, no load1 RESET THRESHOLD VOLTAGE ADM6384x50x ADM6384x49x ADM6384x48x ADM6384x47x ADM6384x46x ADM6384x45x ADM6384x44x ADM6384x43x ADM6384x42x ADM6384x41x ADM6384x40x ADM6384x39x ADM6384x38x ADM6384x37x ADM6384x36x ADM6384x35x ADM6384x34x ADM6384x33x ADM6384x32x ADM6384x31x ADM6384x30x ADM6384x29x ADM6384x28x ADM6384x27x ADM6384x26x ADM6384x25x ADM6384x24x ADM6384x23x ADM6384x22x ADM6384x17x ADM6384x16x RESET THRESHOLD TEMPERATURE COEFFICIENT VCC to RESET DELAY RESET THRESHOLD HYSTERESIS RESET TIMEOUT PERIOD ADM6384xxD1 ADM6384xxD2 ADM6384xxD3 ADM6384xxD4 VCC falling at 10 mV/s from VTH + 100 mV to VTH - 100 mV Rev. 0 | Page 3 of 12 ADM6384 Parameter MANUAL RESET INPUT MR Input Threshold VIL VIH MR Input Pulse Width MR Glitch Rejection MR Pull-Up Resistance MR to Reset Delay RESET Output Voltage VOL Min Typ Max Unit Test Conditions/Comments 0.3 x VCC 0.8 0.7 x VCC 2.4 1 32 100 63 200 100 V V V V s ns kV ns V V V V V VCC < 4 V VCC > 4 V VCC < 4 V VCC > 4 V 0.3 0.3 0.4 0.8 x VCC 0.8 x VCC VOH VCC > = 1.0 V, ISINK = 80 A VCC > = 2.5 V, ISINK = 1.2 mA VCC > = 4.5 V, ISINK = 3.2 mA VCC > = 2.5 V, ISOURCE = 500 A VCC > = 4.5 V, I SOURCE = 800 A 1 TA = 25oC only. Rev. 0 | Page 4 of 12 ADM6384 ABSOLUTE MAXIMUM RATINGS TA = 25C, unless otherwise noted. Table 2. Parameter VCC RESET Output Current ( RESET) Operating Temperature Range Storage Temperature Range JA Thermal Impedance, SC70 Soldering Temperature Sn/Pb Pb-Free Rating -0.3 V to +6 V -0.3 V to +6 V 20 mA -40C to +125C -65C to +150C 331C/W 240C, 30 sec 260C, 40 sec Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ESD CAUTION ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. 0 | Page 5 of 12 ADM6384 PIN CONFIGURATION AND FUNCTION DESCRIPTIONS GND 1 4 ADM6384 TOP VIEW (Not to Scale) RESET 2 3 VCC MR Figure 3. Pin Configuration Table 3. Pin Function Descriptions Pin No. 1 2 3 4 Name GND RESET MR VCC Description Ground. Active-Low Reset Output. Asserted whenever VCC is below the reset threshold, VTH. Push-pull output stage. Manual Reset Input. This is an active-low input which, when forced low for at least 1 s, generates a reset. It features a 52 kV internal pull-up. Power Supply Voltage Being Monitored. Rev. 0 | Page 6 of 12 05305-003 ADM6384 TYPICAL PERFORMANCE CHARACTERISTICS 10.0 9.5 1.05 1.04 NORMALIZED RESET THRESHOLD 04535-006 9.0 8.5 8.0 7.5 1.03 1.02 1.01 1.00 0.99 0.98 0.97 0.96 ICC (A) 7.0 6.5 6.0 5.5 5.0 4.5 4.0 3.5 -40 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 Figure 4. Supply Current vs. Temperature Figure 7. Normalized Reset Threshold vs. Temperature 100 90 80 0.20 VCC TO RESET DELAY (s) 0.15 70 60 50 40 30 0.05 VOUT (V) 0.10 20 10 04535-008 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 0 1 2 3 4 ISINK (mA) 5 6 7 Figure 5. VCC to RESET Output Delay vs. Temperature Figure 8. Output Voltage Low vs. ISINK 1.20 1.15 2.92 NORMALIZED RESET TIMEOUT 2.90 1.10 1.05 1.00 0.95 0.90 2.84 2.88 VOUT (V) 2.86 0.85 04535-007 04535-018 0.80 -40 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 2.82 0 0.2 0.4 0.6 ISOURCE (mA) 0.8 1.0 Figure 6. Normalized Reset Timeout Period vs. Temperature Figure 9. Output Voltage High vs. ISOURCE Rev. 0 | Page 7 of 12 04535-017 0 -40 0 04535-010 0.95 -40 ADM6384 160 140 120 100 VTH = 4.63V 80 60 40 20 VTH = 2.93V 05305-010 RESET OCCURS ABOVE CURVE 340 MAXIMUM TRANSIENT DURATION (s) MANUAL RESET TO RESET DELAY (ns) 320 300 280 260 240 220 200 180 160 140 120 -20 0 20 40 60 TEMPERATURE (C) 80 100 120 05305-011 0 10 100 OVERDRIVE VOD (mV) 1000 100 -40 Figure 10. Maximum VCC Transient Duration vs. Reset Threshold Overdrive Figure 11. Manual Reset Minimum Pulse Width vs. Temperature Rev. 0 | Page 8 of 12 ADM6384 CIRCUIT DESCRIPTION The ADM6384 provides microprocessor supply voltage supervision by controlling the microprocessor's reset input. Code execution errors are avoided during power-up, powerdown, and brownout conditions by asserting a reset signal when the supply voltage is below a preset threshold. In addition, the ADM6384 allows supply voltage stabilization with a fixed timeout before the reset deasserts after the supply voltage rises above the threshold. If the user detects a problem with the system's operation, a manual reset input is available to reset the microprocessor by means of an external push-button, for example. VCC VCC 1V 0V VTH VTH VCC RESET 0V tRP tRD Figure 12. Reset Timing Diagram MANUAL RESET INPUT The ADM6384 features a manual reset input (MR) which, when driven low, asserts the reset output. When MR transitions from low to high, reset remains asserted for the duration of the reset active timeout period before deasserting. The MR input has a 52 k internal pull-up so that the input is always high when unconnected. An external push-button switch can be connected between MR and ground so that the user can generate a reset. Debounce circuitry for this purpose is integrated on-chip. Noise immunity is provided on the MR input, and fast, negative-going transients of up to 100 ns (typ) are ignored. A 0.1 F capacitor between MR and ground provides additional noise immunity. RESET OUTPUT The ADM6384 features an active-low push-pull reset output. The reset signal is guaranteed to be logic low for VCC down to 1 V. The reset output is asserted when VCC is below the reset threshold (VTH) or when MR is driven low. Reset remains asserted for the duration of the reset active timeout period (tRP) after VCC rises above the reset threshold or after MR transitions from low to high. Figure 12 illustrates the behavior of the reset outputs. Rev. 0 | Page 9 of 12 05305-012 ADM6384 APPLICATION INFORMATION NEGATIVE-GOING VCC TRANSIENTS To avoid unnecessary resets caused by fast power supply transients, the ADM6384 is equipped with glitch rejection circuitry. The typical performance characteristic in Figure 10 plots VCC transient duration versus the transient magnitude. The curves show combinations of transient magnitude and duration for which a reset is not generated for 4.63 V and 2.93 V reset threshold parts. For example, with the 2.93 V threshold, a transient that goes 100 mV below the threshold and lasts 8 s typically does not cause a reset, but if the transient is any bigger in magnitude or duration, a reset is generated. An optional 0.1 F bypass capacitor mounted close to VCC provides additional glitch rejection. ENSURING RESET VALID TO VCC = 0 V Both active-low and active-high reset outputs are guaranteed to be valid for VCC as low as 1 V. However, by using an external resistor with push-pull configured reset outputs, valid outputs for VCC as low as 0 V are possible. For an active-low reset output, a resistor connected between RESET and ground pulls the output low when it is unable to sink current. A large resistance such as 100 k should be used so that it does not overload the reset output when VCC is above 1 V. VCC ADM6384 RESET 100k 05305-013 GND Figure 13. Ensuring Reset Valid to VCC = 0 V Rev. 0 | Page 10 of 12 ADM6384 OUTLINE DIMENSIONS 1.35 1.15 2.20 1.80 4 3 2.40 1.80 1 2 PIN 1 0.65 BSC 1.00 0.80 0.50 BSC 0.40 0.10 12 8 1.10 0.80 0.10 MAX 0.30 0.15 SEATING *0.70 PLANE 0.50 0.10 COPLANARITY 0.18 0.10 0.30 0.10 *PACKAGE OUTLINE CORRESPONDS IN FULL TO EIAJ SC82 EXCEPT FOR WIDTH OF PIN-2 AS SHOWN Figure 14. 4-Lead Thin Shrink Small Outline Transistor Package [SC70] (KS-4) Dimensions shown in millimeters ADM6384YKS_ _ D_-RL7 xx x GENERIC NUMBER TEMPERATURE RANGE Y: -40C TO +125C PACKAGE CODE KS: 4-LEAD SC70 Z: LEAD FREE ORDERING QUANTITY RL7: 3,000 PIECE REEL RESET TIMEOUT PERIOD 1: 1ms (MIN) 2: 20ms (MIN) 3: 140s (MIN) 4: 1120s (MIN) RESET THRESHOLD NUMBER (16 TO 50) Figure 15. Ordering Code Structure ORDERING GUIDE Standard Models 1 ADM6384YKS29D1-RL7 ADM6384YKS23D3-RL7 ADM6384YKS29D3-RL7 Reset Threshold (V) 2.93 2.31 2.93 Reset Timeout (ms) 1 140 140 Temperature Range -40C to +125C -40C to +125C -40C to +125C Quantity 3k 3k 3k Package Type SC70-4 SC70-4 SC70-4 Branding N0J N0J N0J 1 If ordering nonstandard models, complete the ordering code shown in Figure 15 by inserting reset timeout and reset threshold suffixes. Contact Sales for availability of nonstandard models. Rev. 0 | Page 11 of 12 05305-014 ADM6384 NOTES (c) 2005 Analog Devices, Inc. All rights reserved. Trademarks and registered trademarks are the property of their respective owners. D05305-0-7/05(0) Rev. 0 | Page 12 of 12 |
Price & Availability of ADM6384YKS29D1-RL7
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |